1. The product contains no white oil and is water-proof, mildew-free, oil-free, stain-free, yellowing-free, UV-free, odor-free, and non-toxic.
   2. The product has one component, high intensity, neutral curing at room temperature, and very high displacement resistance.
   3. The product has generalized high adhesivity to various construction materials, without corrosion or base coating.
   4. The product is resistant to temperatures of -50℃ to 150℃ and cannot be coated and adhered to silicone rubber resin.

★Main Usages

1. The product is used for water-proof, mildew-proof edge sealing and beautifying of wash basins, toilets, shower rooms, bathrooms, tile, and floor.
   2. The product is used for edge sealing and seam trimming of integrated cupboards, with stain resistance, fastness, and scrubbing endurance.
   3. The product is used for adhesion, jointing, and edge sealing of seams in the whole house.

★ Construction Attentions

1. The product does not apply to structural adhesion and assembly.
   2. The product does not apply to all object surfaces seeping grease, plasticizers, or solvents.
   3. The product does not apply to sealed spaces or direct contact with surfaces of food or drinking water.
   4. Construction is not feasible in case of the substrate surface temperature lower than 4℃ or higher than 40℃.
   5. The product does not apply to adhesion with copper or copper alloy-contained substances.

★ Safety Tips

1. Keep good ventilation for sealant construction sites.
2. In case of accidental contact of eyes with uncured adhesive, please wash with a lot of water and seek help from a doctor.
3. Before use, users must test compatibility and adhesivity to ensure conformity of the product and substrate with construction requirements.

1. The product contains no white oil and is water-proof, mildew-free, oil-free, stain-free, yellowing-free, UV-free, odor-free, and non-toxic.
   2. The product has one component, high intensity, neutral curing at room temperature, and very high displacement resistance.
   3. The product has generalized high adhesivity to various construction materials, without corrosion or base coating.
   4. The product is resistant to temperatures of -50℃ to 150℃ and cannot be coated and adhered to silicone rubber resin.

★Main Usages

1. The product is used for water-proof, mildew-proof edge sealing and beautifying of wash basins, toilets, shower rooms, bathrooms, tile, and floor.
   2. The product is used for edge sealing and seam trimming of integrated cupboards, with stain resistance, fastness, and scrubbing endurance.
   3. The product is used for adhesion, jointing, and edge sealing of seams in the whole house.

★ Construction Attentions

1. The product does not apply to structural adhesion and assembly.
   2. The product does not apply to all object surfaces seeping grease, plasticizers, or solvents.
   3. The product does not apply to sealed spaces or direct contact with surfaces of food or drinking water.
   4. Construction is not feasible in case of the substrate surface temperature lower than 4℃ or higher than 40℃.
   5. The product does not apply to adhesion with copper or copper alloy-contained substances.

★ Safety Tips

1. Keep good ventilation for sealant construction sites.
2. In case of accidental contact of eyes with uncured adhesive, please wash with a lot of water and seek help from a doctor.
3. Before use, users must test compatibility and adhesivity to ensure conformity of the product and substrate with construction requirements.

MS-150 is a one-component moisture-curable silane-modified sealant with terminal silyl polyether as the main component.It has good sealing performance and flexibility, no corrosion to the adhesive substrate, no pollution, no pollution to the environment, and good adhesion with concrete, tile, metal and other substrates.

Feature

1. Environmental protection, no solvent, no silicone oil, no pollution substrate, the surface can be painted.
2. High initial adsorption force for quick positioning.
3. Good aging resistance.

The main purpose

Mainly used for indoor pendant nail-free bonding, tile, rock plate joint sealing and other bonding sealing purposes.

Instructions for use

1. The surface of the bonded substrate must be clean and dry, free of dust, oil and water stains.
2. Ambient temperature and humidity have a large impact on the surface drying and curing of sealant, the best construction ambient temperature 5 ~ 35℃, humidity 50 ~ 70%RH.
3. The construction method can refer to the construction instructions or consult our technical personnel.
4. The joint part can be modified with a scraper or rigid foam strip, and the part of the detailed modification can be smoothed with soapy water.

One-component polyurethane foam caulking material, especially suitable for insulation and installation applications in the building sector.It is suitable for bonding, fixing, installation, sound insulation, heat preservation, heat insulation, sealing moisture-proof, gas isolation, filling structural gaps, engineering dynamic gaps and various cracks.

Product features:

1. The normal use temperature of the tank is: 5℃ ~ 35℃.
2. The best use temperature is: 18℃ ~ 25℃.
3. The temperature range after curing is: -30℃ ~ 80℃.
4. Foam can adhere to concrete, coatings, walls, wood and plastic surfaces, but not Teflon and silicone.
5. The product has no harm to human body after curing.

Instructions for use:

1. Shake the can up and down for one minute before use.
2. Clean and wet the construction surface before construction.
3. Turn the tank upside down, connect it with the spray gun, turn it counterclockwise, open the flow valve and adjust the flow rate.
4. Spray from bottom to top, spray amount to 1/2 of the required filling volume.
5. After 10 minutes bubble, foam began to cure; After one hour, you can proceed further.
6. The cured foam can be removed with a sharp knife. The surface is then treated with cement, mortar, paint or silicone.

Safety advice:

1. When inhaled into the body, this product will stimulate the eyes, skin and respiratory system.
2. There is no toxicity when the foam agent is cured.
3. Avoid direct sunlight, store in a cool and dry place, and the temperature does not exceed 50℃.
4. Do not burn or puncture empty cans after use.
5. Do not approach open flames or contact with inflammable and explosive materials.
6. When this product is used, it may produce flammable mixed gas, so the construction site should have ventilation conditions. Construction workers should wear working gloves and goggles, and do not smoke.
7. When this product is not cured, the viscosity is a little strong, and it has permeability to clothing fibers. Do not touch human body and clothing at this time.
8. Keep cans out of reach of children.
9. In case the foam touches the eyes, rinse with water or treat as directed by your doctor. If touching skin, rinse with soap or water.

One-component polyurethane foam caulking material, especially suitable for insulation and installation applications in the building sector.It is suitable for bonding, fixing, installation, sound insulation, heat preservation, heat insulation, sealing moisture-proof, gas isolation, filling structural gaps, engineering dynamic gaps and various cracks.

Product features:

1. The normal use temperature of the tank is: 5℃ ~ 35℃.
2. The best use temperature is: 18℃ ~ 25℃.
3. The temperature range after curing is: -30℃ ~ 80℃.
4. Foam can adhere to concrete, coatings, walls, wood and plastic surfaces, but not Teflon and silicone.
5. The product has no harm to human body after curing.

Instructions for use:

1. Shake the can up and down for one minute before use.
2. Clean and wet the construction surface before construction.
3. Turn the tank upside down, connect it with the spray gun, turn it counterclockwise, open the flow valve and adjust the flow rate.
4. Spray from bottom to top, spray amount to 1/2 of the required filling volume.
5. After 10 minutes bubble, foam began to cure; After one hour, you can proceed further.
6. The cured foam can be removed with a sharp knife. The surface is then treated with cement, mortar, paint or silicone.

Safety advice:

1. When inhaled into the body, this product will stimulate the eyes, skin and respiratory system.
2. There is no toxicity when the foam agent is cured.
3. Avoid direct sunlight, store in a cool and dry place, and the temperature does not exceed 50℃.
4. Do not burn or puncture empty cans after use.
5. Do not approach open flames or contact with inflammable and explosive materials.
6. When this product is used, it may produce flammable mixed gas, so the construction site should have ventilation conditions. Construction workers should wear working gloves and goggles, and do not smoke.
7. When this product is not cured, the viscosity is a little strong, and it has permeability to clothing fibers. Do not touch human body and clothing at this time.
8. Keep cans out of reach of children.
9. In case the foam touches the eyes, rinse with water or treat as directed by your doctor. If touching skin, rinse with soap or water.

One-component polyurethane foam caulking material, especially suitable for insulation and installation applications in the building sector.It is suitable for bonding, fixing, installation, sound insulation, heat preservation, heat insulation, sealing moisture-proof, gas isolation, filling structural gaps, engineering dynamic gaps and various cracks.

Product features:

1. The normal use temperature of the tank is: 5℃ ~ 35℃.
2. The best use temperature is: 18℃ ~ 25℃.
3. The temperature range after curing is: -30℃ ~ 80℃.
4. Foam can adhere to concrete, coatings, walls, wood and plastic surfaces, but not Teflon and silicone.
5. The product has no harm to human body after curing.

Instructions for use:

1. Shake the can up and down for one minute before use.
2. Clean and wet the construction surface before construction.
3. Turn the tank upside down, connect it with the spray gun, turn it counterclockwise, open the flow valve and adjust the flow rate.
4. Spray from bottom to top, spray amount to 1/2 of the required filling volume.
5. After 10 minutes bubble, foam began to cure; After one hour, you can proceed further.
6. The cured foam can be removed with a sharp knife. The surface is then treated with cement, mortar, paint or silicone.

Safety advice:

1. When inhaled into the body, this product will stimulate the eyes, skin and respiratory system.
2. There is no toxicity when the foam agent is cured.
3. Avoid direct sunlight, store in a cool and dry place, and the temperature does not exceed 50℃.
4. Do not burn or puncture empty cans after use.
5. Do not approach open flames or contact with inflammable and explosive materials.
6. When this product is used, it may produce flammable mixed gas, so the construction site should have ventilation conditions. Construction workers should wear working gloves and goggles, and do not smoke.
7. When this product is not cured, the viscosity is a little strong, and it has permeability to clothing fibers. Do not touch human body and clothing at this time.
8. Keep cans out of reach of children.
9. In case the foam touches the eyes, rinse with water or treat as directed by your doctor. If touching skin, rinse with soap or water.